+91-0-8879332379
contact@gautamtube.com

Leading Titanium 6al-4v Round Bar Supplier in India, Check Price List and Sizes of Ti Grade 2 Hex/ Flat Bar

Titanium Round Bar

Titanium Round Bar

Titanium grade is a lightweight, high-strength module. The Titanium Round Bar is designed with a superior chemical concentration of titanium, aluminum, iron, oxygen, carbon, nitrogen, and hydrogen. Designed with a uniform cross sectional area, the Ti Round Bar has enhanced tolerance to corrosive and oxidative media across stress-induced environments. These bars are lighter than 40% of stainless steel and offer good stability. The Ti-6al-4v Round Bar makes up around 50% of the titanium usage in this grade. Designed possessing superior strength, the versatile Titanium Grade 5 Round Bar has enhanced load-bearing capacity. These bars showcase excellent thermal conductivity and have constituents of 6% aluminum and 4% vanadium embedded in them. The Titanium Grade 2 Round Bar is a pure titanium grade that has lower strength than grade 5 bars but is cheaper than these modules.

The Titanium Hex Bar is manufactured in a polygonal cross section. Designed with six sides, these offer good room for movement and rotation in difficult areas across different applications. Grade 2 Titanium Hex Bar showcases excellent workability and can be readily welded in place following standard welding procedures. A Titanium Square Bar is produced in a square cross section. These bars possess good strength and provide stability and torsion to different applications. The Pure Ti Alloy Polished bar can be produced possessing different surface finishes. These bars add an aesthetical appeal to different applications. Ti Alloy Rods are elongated cylindrical modules that provide excellent strength and stability to an array of components. These rods can be custom designed in an array of dimensions and are produced with the best raw materials and latest technology. For any queries or questions with regards to the product type, contact us or visit any of our outlets for more information.

Check specification & Weight of Pure Ti Alloy Polished bar, we supply Titanium grade 2 Cold Rolled Bar stock at factory price

Material Titanium
Length 2 meters to 7.5 meters ( 8 feet to 24 feet), or Custom Length as per Requirement
Crack Test Magnetic Particle Inspection (MPI)
Size range 12 mm - 46 mm (1/2 inch- 1 ¾ inch)
Chamfering Available in 30°, 45° & 60° through fully automatic, both-end chamfering machine
Heat Treatment Annealed, Solution Annealed
Surface Finish Cold (bright) drawn, smooth turned, hot rolled, centreless ground, peeled, Rough Turned, hot rolled annealed, Bright, slit rolled edge, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H10, H9, H11, H13K9, H12, K10, K12 K11 or as per clients’ requirements
Size Tolerances h10 and h11
Available Forms Threaded, Profiles, Rod, Blocks, Round, Channel, Round Rod, Half Round, Triangle, Hollow, Precision Ground, Rectangle, T-Bar, Rings, Ingot, Billet, Forging etc.
Titanium Round Bar Price Per Piece in India Ti Alloy Rod Price in INR Pure Ti Bright BarS Price in UAE Dirham Titanium 6al-4v Round BarS Price in USD
BARS ROUND TITANIUM ALLOY. 18.00MM Per Kg 3,669 UAE Dirham 175.57 $47.80
TI ALLOY ROUND BAR 6AL-4V 4.53 DIAX12 R/L Per kg 2,453 UAE Dirham 117.38 $31.96
Titanium Round Bar

Titanium Round Bar

Titanium Flat Bar

Titanium Flat Bar

Titanium Bar

Titanium Bar

Titanium Industrial Bar

Titanium Industrial Bar

Titanium Alloy Bar

Titanium Alloy Bar

Titanium Grade 2 Round Bar

Titanium Grade 2 Round Bar

Titanium Grade 5 Round Bar

Titanium Grade 5 Round Bar

Titanium Damascus Round Bar

Titanium Damascus Round Bar

Titanium 6al-4v Round Bar

Titanium 6al-4v Round Bar

Titanium Hex Bar

Titanium Hex Bar

Grade 5 Titanium Hex Bar

Grade 5 Titanium Hex Bar

Titanium Square Bar

Titanium Square Bar

Grade 2 Titanium Hex Bar

Grade 2 Titanium Hex Bar

Ti Alloy Rods

Ti Alloy Rods

Ti-6al-4v Round Bar

Ti-6al-4v Round Bar

We Supply Custom Size Grade 5 titanium hex bar, So you Don't need to spend extra, Stockist and Distributor of Titanium Damascus Round Bar

Grade Ti C Fe H N O Al V
Ti Grade 2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max - -
Ti Grade 5 90 min - 0.25 max - - 0.2 max 6 min 4 min
Element Melting Point Density Tensile Strength Elongation Yield Strength (0.2%Offset)
Titanium Gr. 2 1665 °C (3030 °F) 4.5 g/cm3 Psi – 49900 , MPa – 344 20 % Psi – 39900 , MPa – 275
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %
PED approved Ti Alloy hollow/ Triangular Bar Manufacturer in Mumbai, best price of Grade 2 titanium hex bar
STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400
Titanium Gr. 5 3.7165 N56400
Dia (in) Weight per
metre (kg)
Dia (in) Weight per
metre (kg)
3" 36.00 6 1/2" 172.00
3 1/4" 42.90 7" 199.00
31/2" 49.80 7 1/2" 229.00
3 3/4" 57.10 8" 260.00
4" 65.00 8 1/2" 294.00
4 1/4" 73.40 9" 329.00
4 1/2" 82.30 10" 406.00
5" 102.00 11" 492.00
5 1/4" 111.98 12" 585.00
5 1/2" 123.00 340mm 728.00
5 3/4" 134.00 16" 1040.00
6" 146.00

The Ti Alloy rod is forged primarily from pure titanium and ti alloys of various compositions. The forging ratio is the ratio of the metal's cross-sectional area before deformation to the cross-sectional area after deformation. Proper forging ratio selection, reasonable heating temperature and holding duration, reasonable initial and end forging temperatures, reasonable deformation, and deformation speed are all important factors in enhancing product quality and lowering costs.

Cut to size, Check Pure Ti Grade 2 Black Bar stock, best price ex Mumbai, Check Titanium Round Bar Suppliers
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3 0.017 0.055 20 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4 0.030 0.098 24 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25 1.180 3.871 4" 19.306 63.340
5 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26 1.271 4.170 4-1/2" 24.4487 80.340
6 0.068 0.223 27 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7 0.091 0.298 30 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8 0.120 0.398 32 1.894 6.314 6-1/2" 51.093 167.630
9 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35 2.390 7.553 7-1/2" 68.226 225.000
10 0.189 0.620 36 2.438 7.999 8" 77.586 254.55
11 0.228 0.748 38 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12 0.271 0.889 40 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13 0.318 1.043 1-3/4" 3.712 12.179
14 0.368 1.207 45 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15 0.424 1.391 48 4.330 14.205
5/8" 0.473 1.551 50 4.698 15.414
16 0.481 1.578 2" 4.848 15.906
17 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18 0.610 2.001 60 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083
Hsn Code 8108 Titanium Bar
  • Specialty Chemicals
  • Power Generation
  • Gas Processing
  • Petrochemicals
  • Pharmaceutical Equipment
  • Pharmaceuticals
  • Chemical Equipment

Get the Local reference about material quality in your place of Living

CEPSA - Spain

CEPSA - Spain

MOL Plc. - Hungary

MOL Plc. - Hungary

Petróleos de Venezuela, S.A. - Venezuela

Petróleos de Venezuela, S.A. - Venezuela

Are you finding High Quality Seamless/Welded Tubes at best price in Special Steel Grades?.

Contact us